UC016LFA Coupling, 3/4 In, Barb

SharkBite 3/4" Lead-Free Brass Barb Insert Coupling is designed to connect two pieces of 3/4" cross-linked polyethylene (PEX) tubing. It features secure barb ends that can be attached to PEX pipes using TV# 608826 Cinch Clamps and TV# 608743 Cinch Tool, or copper crimp rings and a crimp tool. The coupling is immediately testable to well over 100 PSI and meets the new NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI Standard for products intended for the transport of potable water. It also complies with ANSI/NSF Standard 61 Annex G for lead-free compliance, and the wetted surface of the product contains less than 0.25% of lead by weight, meeting AB1953 California and VT S152 Vermont low lead restrictions. Made of lead-free DZR brass, this coupling is a cost-effective and easy-to-install solution for connecting to PEX tubing. It is compatible with both stainless steel clamp systems and copper crimp ring systems.

• 3/4 in.
• Lead free brass
• Used for connecting 2 pieces of 3/4 in. cross link polyethylene Pex tubing.
• Secure barb ends of fittings to Pex pipe with TV# 608826 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool.
• Immediately testable to well over 100 PSI.
• Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead free compliance & the wetted surface of this product contacted by consumable water contains

Descriptions are AI-generated. For accurate measurements, please call the store to confirm.