Insert Pipe Plug, Lead Free, 1/2 In. Brass Barb

SharkBite 1/2" Lead-Free Brass Barb Insert Plug, designed for pressure testing 1/2" cross link polyethylene PEX tubing. Secure the barb end of the fitting to PEX pipe with TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool. Immediately testable to well over 100 PSI. Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for Lead-Free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet AB1953 California & VT S152 Vermont low lead restrictions.

• 1/2 in.
• Lead free brass
• For pressure testing 1/2 in. cross link polyethylene PEX tubing
• Secure barb end of fitting to PEX pipe with TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool.
• Immediately testable to well over 100 PSI.
• Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead free compliance & the wetted surface of this product contacted by consumable water contains

Descriptions are AI-generated. For accurate measurements, please call the store to confirm.