Barb Insert Pipe Plug, Lead-Free Brass, 3/4 In.

SharkBite 3/4" Lead-Free Brass Barb Insert Plug. It is used for pressure testing 3/4" cross link polyethylene Pex tubing. Secure the 3/4" barb end of the fitting to 3/4" Pex pipe with TV# 608826 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool. Immediately testable to well over 100 PSI. Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead-free compliance, and the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet AB1953 California & VT S152 Vermont low lead restrictions.

• 3/4 in.
• Lead free brass
• Used for pressure testing 3/4 in. cross link polyethylene Pex tubing.
• Secure 3/4 in. barb end of fitting to 3/4 in. Pex pipe with TV# 608826 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool.
• Immediately testable to well over 100 PSI.
• Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead free compliance & the wetted surface of this product contacted by consumable water contains

Descriptions are AI-generated. For accurate measurements, please call the store to confirm.