Sliding Door Ball Bearing Roller Assembly, 1-1/4 In.

This is a K-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-Tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and a 3/4 in. dimple width. Used by International and a variety of other sliding patio door manufacturers.

• Used by International Windows Corporation and a variety of other sliding patio door manufacturers
• K-tab style housing
• 1-1/4 in. diameter concave steel roller
• Stamped steel housing with ball bearing roller