Hanson #3 Straight Flute Screw Extractor

Irwin Hanson #3 Straight Flute Screw Extractor is designed for softer materials or thin walled pieces such as pipes & fittings. The design eases extraction because it does not expand the material as you remove it. It removes both left hand & right hand threaded parts. It removes bolts & screws 7/16" & 1/8" NPT, 10 mm, 1/8" BSP. It uses 15/64" drill bit. Made from rugged, high carbon steel for use in soft materials or thin-walled pieces such as pipe and fittings. Able to remove left-hand bolts as well as right-hand bolts. Extractor size and recommended drill bit size are etched on each tool for easy identification.

• #3 Straight Flute Screw Extractor
• Designed for softer materials or thin walled pieces such as pipes & fittings
• Eases extraction because it does not expand the material as you remove it
• Removes both left hand & right hand threaded parts
• Removes bolts & screws 7/16 In. & 1/8 In. NPT, 10 mm, 1/8 In. BSP
• Uses 15/64 In. drill bit